Very basic, Cheap & Easy - Greenhouse's!

Marijuana growing how to, marijuana tutorials and step by step guides about how to grow marijuana. How to clone marijuana plants. How to build a hydropnics system for marijuana growing and much more.

Materials

12 - 1x1 wood stakes
Nails
Hammer
Saran/Plastic Wrap
Double sided sticky tape (optional)


Step 1: Set up 4 1x1's in a square and nail them in place. Do this again with 4 more stakes. (If needed, cut the angled part off on the bottom)

Step 2: Nail the remaining 4 stakes to each corner of one of the squares. It should then look like a table with no top.

Step 3: Then nail the other side of the 4 stakes coming of the square to the other square.

Step 4: With the double sided tape, apply along the stakes all around. And carefully place the plastic wrap onto the tape. Make sure it is a tight fit. Apply that to all sides with the exception of the bottom.

OR

If you do not have the double sided tape, Simply take the plastic wrap and wrap it once aroud one of the stakes. Then simply wrap it around the whole entire cube until all sides (except one) have been covered!

Done! - You should now have a cubed shaped greenhouse!


Materials

Cardboard box (decent size)
scissors or box cutter
Saran/Plastic wrap
Double sided sticky tape (optional)


Step 1: Take your cardboard box and flip it upside down so that the open side is on the ground.

Step 2: Take the scissors or box cutter and cut out each side of the cardboard box LEAVING THE EDGES!
- You should now have a gutted out cardboard box FRAME!

Step 3: With the double sided tape, apply along the cardboard edges all around. And carefully place the plastic wrap onto the tape. Make sure it is a tight fit. Apply that to all sides with the exception of the bottom.

OR

If you do not have the double sided tape, Simply take the plastic wrap and wrap it once aroud one of the cardboard edges. Then simply wrap it around the whole entire cube until all sides (except one) have been covered!

Done! - You should now have a cubed shaped greenhouse!


Materials

3 liter bottle
Scissors


Step 1: Wash out the inside of the bottle. Then unwrap the plastic label that wraps around the bottle.

Step 2: Cut off the bottom of the bottle, only a little bit. You want your greenhouse to be as big as possible.

Done! - You should now have a small greenhouse that you can simply place over your baby plants or clones!


Remember, with each greenhouse, make sure to have proper ventilation! It gets pretty hot in them things! :-o

If someone wants to add onto anything, please do so. I will have pictures ASAP of hopefully all 3 models but definitely the 1st one.

Too bad no more free seeds :cry: Oh well, at least I gave some kind of beneficial help to fellow growers :lol:

Smoke/Grow on! 8)

Got any pics?


Return to Marijuana How to, Tutorials, Tips

 


x #{title}

#{text}